NuQ-10 Architect's and Engineer's Specifications
The system shall be of the full range, two-way type consisting of one 10" (254mm) low frequency loudspeaker and one 1" (25mm) high frequency driver on a Converging Elliptical Waveguide™. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±4dB from 55Hz to 20kHz. Nominal dispersion, at -6dB points, shall average 100 degrees horizontal x 60 degrees vertical. Maximum SPL (peak) measured with music program at stated amplifier input shall be 127dB. Dimensions: 525mmH x 318mmW x 258mmD (20.7"H x 12.5"W x 10.2"D). Weight: 12kg (26.4lbs). The loudspeaker system shall be the Turbosound NuQ-10. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verify that the above combined performance / size specifications are equalled or exceeded.