NuQ-12 Architect's and Engineer's Specifications
The system shall be of the full range, switchable activ/passive type consisting of one 12" (305mm) low frequency loudspeaker and one 1.4" (35mm) high frequency driver on a Converging Elliptical Waveguide™. Performance specifications of a typical production unit when used with a Turbosound LMS series loudspeaker management system shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±4dB from 55Hz to 20kHz. Nominal dispersion, at -6dB points, shall average 80 degrees horizontal x 50 degrees vertical. Nominal inpedance shall be 8 ohms. Power handling shall be passive: 450 watts continuous, 900 watts program; active LF: 350 watts continuous, 700 watts program, HF: 100 watts continuous, 200 watts program. Sensitivity, measured with 1 watt input at 1 metre distance on axis, mean averaged over stated bandwidth, shall be 98dB. Maximum SPL (peak) measured with music program at stated amplifier input shall be 133dB. Dimensions: 655mmH x 373.5mmW x 340mmD (25.8"H x 14.6"W x 13.4"D). Weight: 20kg (44lbs). The loudspeaker system shall be the Turbosound NuQ-12. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verify that the above combined performance / size specifications are equalled or exceeded.