TA-500DP Architect's and Engineer's Specifications
The loudspeaker system shall be of thenetworkable digitally self-powered type, consisting of one high frequency driver on a patented Polyhorn™ one 10" (254mm) mid frequency driver loaded with a patented Polyhorn™, and one 15" (381mm) low frequency driver loaded with a TurboBass™ device. The integral power amplifier module shall provide two channels of Class D amplification, output limiting, and equalisation incorporating frequency response optimised for speech and music. Performance specifications of a typical production unit shall meet or exceed the following: Frequency response, measured with swept sine wave input, shall be flat within ±4dB from 60Hz - 20kHz (with DSP). Maximum SPL (peak), measured with music program input at stated amplifier power shall be 141dB. Dimensions: 977mmH x 574mmW x 498mmD (38.5" x 22.6" x 19.6"). Weight: 54kg (118.8lbs). The loudspeaker system shall be the Turbosound TA-500DP. No other loudspeaker system shall be acceptable unless submitted data from an independent test laboratory verify that the above combined performance/size specifications are equalled or exceeded.