TA-890H Architect's and Engineer's Specifications
The loudspeaker system shall be of the tri-amped, three way active type, consisting of two 10" low-mid frequency drivers loaded with TurboMid™ devices, one 10" high-mid driver on an HMF Polyhorn™, and two HF drivers on an HF Polyhorn™. Performance specifications of a typical production unit shall meet or exceed the following: Frequency response, measured with swept sine wave input, shall be flat within ±4dB from 95Hz - 20kHz. Nominal impedance shall be: LMF: 8 ohms, HMF: 16 ohms, HF: 12 ohms. Power handling shall be LMF: 500 watts r.m.s., 1000 watts program; HMF: 200 watts r.m.s., 400 watts program; HF: 100 watts r.m.s., 200 watts program. Sensitivity, measured with 1 watt input at 1 metre distance on axis, mean averaged over stated bandwidth, shall be LMF: 107dB, HMF: 114dB, HF: 114dB. Maximum SPL (peak), measured with music program input at stated amplifier power shall be 146dB. Dimensions: 795mmH x 477mmW x 574D (31.3" x 18.8" x 22.6"). Weight: 76 kg (167 lbs). The loudspeaker system shall be the Turbosound TA-890H. No other loudspeaker system shall be acceptable unless submitted data from an independent test laboratory verify that the above combined performance/size specifications are equalled or exceeded.