The NuQ102-AN-WH is the white-finish, install-version of the NuQ102 active 10-inch two-way point-source loudspeaker, supplied with a 12 V AC-on remote-trigger interface (AN designation) for integration with venue control systems and finished in the white (WH) livery for installations where the cabinet must visually recede into the architecture. The 10-inch ferrite low-frequency driver, with a 2.5-inch high-temperature aluminium voice coil and a vented pole-piece for sustained thermal stability, is paired with a 1-inch exit compression driver carrying a 1.4-inch annular polyimide diaphragm loaded onto a 90-by-60-degree rotatable constant-directivity waveguide. The waveguide can be rotated through 90 degrees by removing four front-baffle screws, allowing the cabinet to be installed in either landscape or portrait orientation without affecting on-axis response. Both transducers are driven by an internal Class-D amplifier producing 600 W LF and 100 W HF, with onboard DSP managing the 1.6 kHz active crossover, FIR phase pre-correction, multi-band limiting and the 12 V AN remote-trigger logic for unattended power-up and stand-by sequencing from a venue control panel. Power-input is via Powercon TRUE1 with an integrated through connector for daisy-chained mains distribution to additional cabinets in the array, and audio inputs are two combo XLR/jack on the rear panel with a rear-panel four-position preset selector and a high-pass filter switch to integrate with a subwoofer. Maximum peak SPL is 128 dB at 1 m and frequency response is 65 Hz to 20 kHz (-10 dB), with a 90-degree-by-60-degree nominal coverage pattern. Construction is 12 mm Baltic birch with a white polyurethane finish and a white powder-coated steel grille backed by acoustic foam. The cabinet includes four M8 fly points, a 35 mm sub-pole socket on the underside and a yoke-compatible side-plate for wall mounting. Suitable for restaurants, retail, houses of worship and corporate AV in high-aesthetic spaces. Designed and engineered in the U.K. by Turbosound.