The Turbosound NuQ-15-WH is the white-finished variant of the NuQ-15 two-way full-range passive loudspeaker, designed and engineered in the United Kingdom for portable PA and fixed-install applications where a light architectural finish is required. The cabinet houses a 15-inch low-frequency driver and a high-frequency compression driver on a wide-dispersion constant-directivity horn, in a trapezoidal birch-ply enclosure with integrated 35 mm pole socket, M10 fly-points and a side-firing kick-back angle that allows the cabinet to double as a high-output stage monitor. The passive crossover is voiced for full-range coverage with phase-coherent overlap between the LF and HF sections, delivering the SPL and pattern control required for live music, hospitality, retail and event-venue applications. Driven from an external amplifier via dual NL4 connectors (input and parallel link), the NuQ-15-WH integrates with the venue's existing amplifier rack and DSP chain without per-cabinet powering. The white finish allows the cabinet to blend with light architectural interiors where black cabinets would visually intrude. Compatible with the FY-NuQ15 flying yoke, swivel U-brackets and standard Turbosound rigging accessories for permanent overhead and wall-mount deployment, and supplied with a powder-coated perforated steel grille over an acoustically transparent foam liner. The cabinet's voicing matches the black NuQ-15 directly, so the install engineer can mix black and white finishes across a venue's coverage zones without tonal compromise or per-cabinet equalisation, simplifying multi-room commissioning in hospitality and retail estates.